quit

CONSTRUCTION

Conductor EC Grade Annealed Bare Copper
Tape White Color BOPP (Bi-axially oriented poly propylene)

Special Features

  • Good Temperature Resistance
  • Excellent Corrosion Resistance
  • Good Tear Resistance
  • High Tensile Strength
  • High Dielectric Strength
  • Negligible Leakage Current
  • Easily Bendable for easy Winding
  • Firm Insulation for high mechanical strength
  • Good Chemical and Thermal Resistant Properties

INSTRUCTION FOR USE

  • Do not stack more than 4 coils otherwise, bottom coil is likely to get damaged due to upper coil weight.
  • Always keep away winding wire from those things having sharp edges and equipment generate heat to avoid unintentional damage. Also avoid welding spark falling on winding.
  • Motor manufacturers must ensure proper cable joining after winding to avoid megger or winding failer.

STANDARDS

Generally conforms to IS : 8783, DIN 53483, and VDE 0472

PACKING :

500 Meters and 1000 Meters bundles available

SIZE

0.4 mm to 3 mm conductor

Specification

Sr. No. Nominal
Conductor
Diameter
mm
Conductor Cross
Sectional Area
Nominal
mm
Appx.
Overall
Diameter
mm
Max. D.C
Conductor
Resistance
ohm/km
Elongation
(min.)
%
Appx. Weight
Per 1000m
kg.
1 0.40 0.126 0.80 140 24 1.47
2 0.50 0.196 0.90 89.6 25 2.15
3 0.60 0.283 1.00 62.2 26 2.98
4 0.70 0.385 1.10 45.7 28 3.95
5 0.80 0.502 1.20 * 35 28 5.05
6 0.90 0.636 1.30 27.6 29 6.30
7 1.00 0.785 1.40 22.4 30 7.80
8 1.10 0.95 1.50 18.5 30 9.20
9 1.20 1.13 1.60 15.5 31 10.90
10 1.30 1.33 1.70 13.2 32 12.70
11 1.40 1.54 1.90 11.4 32 14.90
12 1.50 1.77 2.00 9.95 32 17.00
13 1.60 2.01 2.10 8.75 32 19.20
14 1.70 2.27 2.20 7.75 32 21.60
15 1.80 2.54 2.30 6.91 32 24.20
16 1.90 2.83 2.40 6.2 32 26.80
17 2.00 3.14 2.50 5.6 33 29.60
18 2.10 3.46 2.60 5.08 33 32.55
19 2.20 3.8 2.70 4.63 33 35.60
20 2.30 4.15 2.80 4.23 33 38.85
21 2.40 4.52 2.90 3.89 33 42.20
22 2.50 4.91 3.00 3.58 33 45.70
23 2.60 5.31 3.10 3.31 34 49.30
24 2.70 5.73 3.20 3.07 34 53.10
25 2.80 6.16 3.30 2.86 34 57.00
26 2.90 6.61 3.40 2.66 34 61.05
27 3.00 7.07 3.50 2.49 34 65.25

Note:

The number of wires and diameter mentioned in the table are approximate and nominal; however they shall meet the requirements of conductor resistance as per standards.
In view of continuous improvements in our design and process, the information, Dimensions and specifications given herein are subject to change without notice.